Note:
This hub assembly is a Bolt-on adaptation for open dropout Thru-axle frames. For use in conjunction with a 10mm chain tensioner.
New for 2025. Bearings standardized to EZO.
| A - Hub Center To Flange Center, Non-Drive Side (mm) | 27.85 |
|---|---|
| B - Hub Center To Flange Center, Drive Side (mm) | 27.85 |
| C - Axle Width (mm) | 110 |
| Spoke Hole Circle Diameter, Drive Side (mm) | 50 |
| Spoke Hole Circle Diameter, Non-Drive Side (mm) | 50 |
| Spoke Hole Counts Available | 28/36 |
| Weight | 15.4 oz / 437 g |
|---|---|
| Dimensions - Approximate for Shipping | 9.5 × 4.5 × 4 in |
| Hub Type | |
| Axle Width - mm | |
| Axle Diameter - mm | |
| Spoke Count | |
| Attach Style | |
| Hub Shell Style | |
| Hub Shell Flange Type | |
| Bolts | |
| Driver Style | |
| Spoke Tension - Max kgf | |
| Product Line |
| Although we do our best to ensure these values are correct, always verify by measurement. Onyx Racing takes no responsibility for errors. | ||
| Results for an ERD of 0 mm | ||
| 28 Spoke Holes | Non-Drive Side (mm) | Drive Side (mm) |
|---|---|---|
| 1-Cross | 0 | 0 |
| 2-Cross | 0 | 0 |
| 3-Cross | 0 | 0 |
| 4-Cross | 0 | 0 |
| 36 Spoke Holes | Non-Drive Side (mm) | Drive Side (mm) |
| 1-Cross | 0 | 0 |
| 2-Cross | 0 | 0 |
| 3-Cross | 0 | 0 |
| 4-Cross | 0 | 0 |
| Image | Name | Qty Per | SKU | Price |
|---|---|---|---|---|
 | Axle, Rear - BMX 110-10mm Bolt | 1 | 093211 | $20.00 |
 | Bearing, Sealed - 6804 - 20 x 32 x 7 | 2 | 111161 | $14.00 |
 | Bearing, Sealed - 6805 - 25 x 37 x 7 | 1 | 111162 | $15.00 |
 | Bolt, SOC HD 10mm x 1.5pitch x 40mm, Titanium | 2 | 084166 | $20.00 |
 | Bolt, SOC HD 3mm x 8mm, Stainless Steel | 1 | 042557 | $0.25 |
 | Cog Spacer Pack, HG & HGSS - 7.3mm | 086351 | $15.00 | |
 | COG, HG and HGSS - Anodized Aluminum | $35.00 | ||
 | COG, HG and HGSS - Stainless Steel | $50.00 | ||
 | Cone, Knurled - 10mm | 2 | 100384 | $10.00 |
 | Driver Kit, BMX PRO - Stainless Steel | 1 | 096212 | $100.00 |
 | Endcap, Knurled - Left, 20mm Thru | 1 | 100388 | $20.00 |
 | Endcap, Knurled - Right, 20mm Bolt | 1 | 100389 | $20.00 |
 | Nut Kit, Locking Seal, 17mm | 1 | 095273 | $20.00 |
 | O-Ring, 15 mm x 2 mm | 1 | 083657 | $0.25 |
 | O-Ring, 18 mm x 1 mm | 1 | 038382 | $0.25 |
 | O-Ring, 23 mm x 1 mm | 2 | 039513 | $0.25 |
 | Retaining Ring, Internal 1.25dia - Stainless Steel | 1 | 085300 | $1.00 |
 | Ring, Locking - 1.37 x 24 thread per inch | 1 | 038104 | $15.00 |
 | Sprag Clutch, 432-Z | 1 | 039661 | $80.00 |
